Hi Howard I have changed the settings on my NR and it is much better (TO ME anyway). Here are my settings if you want to give them a try, I had a K3 for a few months I liked the NR and ANF filters and these settings were very close to how the NR and ANF sounds on the K3. Write down your original settings if you don't like the results these settings give you.
Click on Setup, then DSP NR Taps: 40 Delay: 30 Gain: 15 Leak: 10 I also changed the "ANF" settings to my liking and here is what I like on my Radio's. ANF Taps: 68 Delay: 60 Gain: 25 Leak: 1 I have my "Buffer Size" set for Phone RX: 4096 TX: 2048 CW RX: 4096 Digital is at the defaults of 2048 IF you have to reset your Database then you will loose these settings and they will go back to default's so you may want to save a Database. Don't be afraid to play with the PowerSDR settings, it is a wonderful radio and you really can't hurt anything. I keep a Backup Database after each change I like so I can ALWAYS step backward to the previous Database if something goes haywire. 73's and have a good evening Bret WX7Y -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Wednesday, May 23, 2012 3:38 PM To: [email protected] Subject: [FlexEdge] I am still waiting for a working NR in my PowerSDR formy Flex 5000 I am still waiting for a working NR in my PowerSDR for my Flex 5000. I gave up some time ago and purchased a GAP Hear It In Line Module made by BHI in England. I suppose Flex moving on to making this new radio means Flex has given up on making a working NR on the Flex 5000. The Flex 5000 must now be considered a finished almost legacy product. I hope the Flex 6000 owners will continue to always get free software updates until this new unit has a working NR. Based on the Flex 5000, that means.....probably never. Other than the NR, the Flex 5000a has been an amazing radio. Regards, Howard _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
