Ah yes. I went in just to see, as it has been a while. My serial number on my 3000 is 2009-0123, which is the first production batch made. I sent mine in for the free IP2 upgrade back when that was offered, so mine shows revision G. Not that anyone is interested, but good to be reminded of just how much Flex stood behind their equipment.
So mine is equivalent to "late model". 73, Scott AC8DE -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Les Gasser W9XC Sent: Monday, June 18, 2012 1:32 PM To: [email protected] Cc: [email protected] Subject: Re: [FlexEdge] wanted: Late Model Flex-3000 (Updated preamp info) Here's what the Nov 2009 QST updated review of the Flex 3000 says about the preamp update: "FlexRadio Systems has informed us that all FLEX-3000s shipped beginning in September [2009] include the preamp modifications. To determine if your FLEX-3000 incorporates the IP2 upgrade, check to see if the TRX board hardware revision is revi- sion G or higher. Open PowerSDR and click on SETUP/GENERAL/HARDWARE CONFIG/. Look at the last letter of the TRX serial number. If it is Rev G or later, it indicates the IP2 improvement is in place. Contact FlexRadio if you have an earlier version and you desire to receive this upgrade. It will be provided at no cost." 73, - Les, W9XC _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
