At 10:57 6/18/2012, Scott Myers wrote:
Ah yes. I went in just to see, as it has been a while. My serial number on
my 3000 is 2009-0123, which is the first production batch made. I sent mine
in for the free IP2 upgrade back when that was offered, so mine shows
revision G.
I am confused. Mine says 35G. Does that mean it is up-to-date? Somebody said
it had to be 35H to have the fix.
Not that anyone is interested, but good to be reminded of just
how much Flex stood behind their equipment.
So mine is equivalent to "late model".
73,
Scott AC8DE
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Les Gasser W9XC
Sent: Monday, June 18, 2012 1:32 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [FlexEdge] wanted: Late Model Flex-3000 (Updated preamp info)
Here's what the Nov 2009 QST updated review of the Flex 3000 says about the
preamp update:
"FlexRadio Systems has informed us that all FLEX-3000s shipped beginning in
September [2009] include the preamp modifications. To determine if your
FLEX-3000 incorporates the IP2 upgrade, check to see if the TRX board
hardware revision is revi- sion G or higher. Open PowerSDR and click on
SETUP/GENERAL/HARDWARE CONFIG/. Look at the last letter of the TRX serial
number. If it is Rev G or later, it indicates the IP2 improvement is in
place. Contact FlexRadio if you have an earlier version and you desire to
receive this upgrade. It will be provided at no cost."
73,
- Les, W9XC
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It
is used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
--
Dave Gomberg, San Francisco NE5EE Programming since 1961
All addresses, phones, etc. at http://www.wcf.com/ham/info.html
-----------------------------------------------------------------
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
