Is there a WIKI or step by step instructions to install RMS Express and required software items?
Thanks George K2CM . ________________________________________ From: Bernie Huth [[email protected]] Sent: Thursday, July 19, 2012 11:55 AM To: George Allen; [email protected] Subject: Re: [FlexEdge] WL2K software? I would suggest RMS Express (for both the Flex and the TS2000) which is available at http://www.winlink.org . I have a Flex-3000 so have only used this combination for HF using the Winmor protocol. Read the help file for suggested Flex settings. For the TS2000 I suggest the Signalink unit for an HF soundcard, and for VHF I suggest an external TNC such as the Kantronics KPC3+. The internal TNC in the TS2000 may work, but I have heard about some cases where it was inadequate. -73- Bernie W4BGH on 7/19/12 10:33 AM, George Allen at [email protected] wrote: > > Any suggestions regarding software to use with the F5K so I can get into the > WL2K? Our club also needs software to get into WL2K using a TS2000. > > George > K2CM > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
