Tnx Al. Have done 1, 3, and 3 <g>. Been reluctant to do the reset (2) but
think it is time.
Gedas, W8BYA
Gallery at http://gedas.cc
Light travels faster than sound..
This is why some people appear bright until you hear them speak.
----- Original Message -----
From: "Al K0VM" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Saturday, August 18, 2012 2:52 PM
Subject: Re: [FlexEdge] Lack of CW Tone on 5000A
Gedes,
Things to try..
1) close PSDR and restart. If still problem..
2) Go to PSDR setup and do a reset to Factory defaults. If still
problem..
3) Close PSDR, shut down the Flex Hardware then restart. if still
problem.
3) Closwe PSDR, shut down the Fles hardware and unplug the power to
the hardware then restart.
if still problem.. Call Flex/Open help desk trouble call.
AL, K0VM
On 8/18/2012 1:26 PM, Gedas wrote:
I am hoping someone can spot what I did wrong here so I can get back to
normal. Yesterday night I was operating CW on 2m using the V/U module
and all was ok. Today, as far as I know, all I did was try to use the
VAR bandwidth option while in CW mode in order to get more than the
standard 1 kHz during RCV. I needed this because the station I was
working was operating SSB while I was on CW. I also changed the Sample
rate from 192k to 96k but don't rem if that was before or after the CW
trouble started. I use a quad-core desktop and XP with SP3. CPU usage
hovers between 9-15%.
What several stations reported to me today is that when I send CW all
they hear is clicking. They could not find any tone above or below the
carrier. I can hear CW fine when I enable the MON. And, according to my
external wattmeter, normal pwr is being transmitted. I usually leave
the CW offset set to 650 Hz and stations use to be able to hear me fine.
This is using my external paddles or CWx. One station however reported
that my signal starts out with just clicking then after 5-10 seconds he
can hear a tone.....too weird !
Hoping someone can help, TU.
73 Gedas, W8BYA
Gallery at http://gedas.cc
Light travels faster than sound..
This is why some people appear bright until you hear them speak.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
