When you do a db reset, your original db is saved to your desktop and
and be imported later if you wish.
If the reset fixes the problem, you can use K9DUR's SDR database
transfer program to recover most of you personalized stuff from the
desktop version into into the new database.
Al, K0VM
On 8/18/2012 2:08 PM, Gedas wrote:
Tnx Al. Have done 1, 3, and 3 <g>. Been reluctant to do the reset
(2) but
think it is time.
Gedas, W8BYA
Gallery at http://gedas.cc
Light travels faster than sound..
This is why some people appear bright until you hear them speak.
----- Original Message ----- From: "Al K0VM" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Saturday, August 18, 2012 2:52 PM
Subject: Re: [FlexEdge] Lack of CW Tone on 5000A
Gedes,
Things to try..
1) close PSDR and restart. If still problem..
2) Go to PSDR setup and do a reset to Factory defaults. If still
problem..
3) Close PSDR, shut down the Flex Hardware then restart. if
still problem.
3) Closwe PSDR, shut down the Fles hardware and unplug the power
to the hardware then restart.
if still problem.. Call Flex/Open help desk trouble call.
AL, K0VM
On 8/18/2012 1:26 PM, Gedas wrote:
I am hoping someone can spot what I did wrong here so I can get
back to normal. Yesterday night I was operating CW on 2m using the
V/U module and all was ok. Today, as far as I know, all I did was
try to use the VAR bandwidth option while in CW mode in order to
get more than the standard 1 kHz during RCV. I needed this because
the station I was working was operating SSB while I was on CW. I
also changed the Sample rate from 192k to 96k but don't rem if that
was before or after the CW trouble started. I use a quad-core
desktop and XP with SP3. CPU usage hovers between 9-15%.
What several stations reported to me today is that when I send CW
all they hear is clicking. They could not find any tone above or
below the carrier. I can hear CW fine when I enable the MON. And,
according to my external wattmeter, normal pwr is being
transmitted. I usually leave the CW offset set to 650 Hz and
stations use to be able to hear me fine. This is using my external
paddles or CWx. One station however reported that my signal starts
out with just clicking then after 5-10 seconds he can hear a
tone.....too weird !
Hoping someone can help, TU.
73 Gedas, W8BYA
Gallery at http://gedas.cc
Light travels faster than sound..
This is why some people appear bright until you hear them speak.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It
is used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
