Ok Tim.
I will verify the comaptibility per the link below, thanks :-)
73s
Erik OZ4KK
This sounds like one of the Firewire RX/TX contexts are not
initializing properly. This is usually a Firewire card issue.
Have you verified your Firewire card compatibility?
http://kc.flexradio.com/KnowledgebaseArticle50456.aspx
Tim Ellison
On 8/27/2012 4:40 AM, Erik Jakobsen wrote:
Hi again.
PowerSDR is starting ok up, but first after a stop and then a start
there is audio in the loudspeaker.
73s
Erik OZ4KK
Hi.
Once I saw here on the reflector an info about starting up PowerSDR
with start.
It was as I think the issue I have now, that I have to click 2 times
on the start/stop
button before audio is coming out of the loudspeaker.
What was it about ?
73s
Erik OZ4KK
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software innovation and other
technical SDR topics.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software innovation and other
technical SDR topics.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software innovation and other technical SDR
topics.
