Randy - It is a measurement issue. Flex (and most power measurements) assume a steady state signal (key down CW or FM). SSB is anything but so you should never see anything like 100 watts.
73 Ken AC0HO On Sat, Nov 17, 2012 at 11:24 AM, RANDY DIDDEL <[email protected]> wrote: > My 3000 arrived two days ago. It is on the air and working. With out of > the box settings, audio reports were described as being muffled. I > immediately started in with eq settings and fixed that by using the DVR > function with a dummy load. Then I noticed that with drive at 100%, I was > only getting about 40-60 watts out. I upped the mic gain(35) and checked > the mixer levels (100%) as soon as I cracked the mic gain above 40, audio > started to sound over driven and distorted and RF out only peaked at about > 75 watts. I also noticed with the Heil mic, the mixer slider must be almost > 90% or greater in order for the software to see any signal on the meters. > > > So my question is EQ settings aside (subjective, I know), does anyone have > a Heil Proset 6 and could share their levels with me? I suspect I am off > somewhere in the signal chain. Oh, and for reference, I found this article > and tried those instructions and lost power! > > > http://www.w1aex.com/psdrgain/psdrgain.html > > I have spent hours Googling and tweaking the settings without luck. On the > plus side I am now very familiar with the UI. > > > Thanks and 73 > > /randy > > Sent from my iPad. Please excuse my brevity. > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software innovation and other > technical SDR topics. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
