I seem to lose VAC or something falls asleep every know and again. When operating digital modes (only) everything can be fine for a few hours and then I get no transmit...nothing. The Flex 3000 goes in to transmit ,the graphic image of the transmitted signal is minimal and forward power is zero. No tones heard via MON. If I switch to Phone or CW output power is good, if I switch to TUNE outpt power is at the power level default for TUNE. If I close the digital mode software and reboot it, the ability to transmit RF with digital modes SOMETIMES returns. , If I close only PSDR .. the problem persists. If I close BOTH and reboot both, almost always everything becomes good again ...for a while. This happens several times per day. It happens with Fldigi, WSJT-X, RMS Express. I have double checked my VAC settings. It appears to happen most often when I have changed tasks in PowerSDR. e.g. switching from USB to Digu, or tweaking the ATU. Using Windows 8.1 but it was also happening with Windows 8.0
Andy K3UK _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
