I started with a fresh database, will see if this solves the problem. Andy
On Sun, Jul 14, 2013 at 9:39 PM, Andrew O'Brien <[email protected]> wrote: > I seem to lose VAC or something falls asleep every know and again. > When operating digital modes (only) everything can be fine for a few > hours and then I get no transmit...nothing. The Flex 3000 goes in to > transmit ,the graphic image of the transmitted signal is minimal and > forward power is zero. No tones heard via MON. If I switch to Phone or > CW output power is good, if I switch to TUNE outpt power is at the > power level default for TUNE. If I close the digital mode software and > reboot it, the ability to transmit RF with digital modes SOMETIMES > returns. , If I close only PSDR .. the problem persists. If I close > BOTH and reboot both, almost always everything becomes good again > ...for a while. This happens several times per day. It happens with > Fldigi, WSJT-X, RMS Express. I have double checked my VAC settings. > It appears to happen most often when I have changed tasks in PowerSDR. > e.g. switching from USB to Digu, or tweaking the ATU. Using Windows > 8.1 but it was also happening with Windows 8.0 > > > Andy K3UK _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
