I have
investigated this clicking further and discovered that the clicking disappears
when I set the AGC to fixed (both NR and ANF still on). With the AGC set to
fixed, I then went to the SDR setup DSP tab and increased the fixed gain using
the little up/down arrows to the right of the list box. With each increase I
heard the same click, which became louder as the AGC gain increased. If I
adjusted any other list box I heard nothing. To me this would seem to indicate
that with the AGC on any other setting other than fixed, as the AGC adjusts the
gain value, a click is audible. I hope this
useful to anyone to help me solve this issue. Joe Hi All, On SSB receive,
I am experiencing soft clicking sounds when both
the NR and ANF are on. I have played with many combinations of DSP settings and
audio sample sizes, but nothing seems to help, nor does cycling power
on/standby. CPU usage is around 10%. Does anyone have any ideas? My setup is as follows: Dell dimension 3000
computer (P4 HT 3GHz, 1Gb RAM, XP Home SP2), the Delta-44 sound card with HOSA
cable set and audio run through a Behringer UB802 mixer (mic preamp and
headphone amp). I have not adjusted either the card line-in gain (20) or the
output voltage (.98) in the SDR setup audio tab. 73 de
Joe, AB1DO |
- [Flexradio] Soft clicking when NR and ANF are on Joe - AB1DO
- Re: [Flexradio] Soft clicking when NR and ANF are on Ken - N9VV
- [Flexradio] RE: Soft clicking when NR and ANF are on Joe - AB1DO