I've posted an experimental version of 1.3.7 @:
Source:
http://www.tracey.org/wjt/sdr1k/PowerSDR-1.3.7-KD5TFD-KB9YIG-QRP-20050612-Source.zip
Binary:
http://www.tracey.org/wjt/sdr1k/PowerSDR-1.3.7-KD5TFD-KB9YIG-QRP-20050612-Binary.zip
This contains all I had in the 1.3.5 experimental + some new buttons ( <<
<P P> >>) to tune +/- 50/100 % of the current (Panadapter, Spectrogram,
Waterfall, and Histogram modes). The buttons are typematic so they can be
used to tune across the band fairly quickly.
This driver also contains some experimental stuff for KB9YIG's SDR Sampler
board. On the test tab one can tell the radio the frequency of the
external oscillator and it will setup to allow software tuning +/- sampling
rate/2 around that frequency (similar to 'tuning' an IQ file). It also
disables transmit (temporary restriction), turns off spur reduction, and
pushes all the received audio to the Left channel. If you set this with an
SDR 1000 attached the DDS in the SDR 1000 is set to the fixed freq entered
and you can tune around that frequency as if it were a fixed freq. piece of
hardware. Sort of fun to see how far one can tune entirely in software.
Bill (kd5tfd)