I've updated the binary zip to include some DLLs that are needed if playing
with the features for Tony's board.
Updated Binary:
http://www.tracey.org/wjt/sdr1k/PowerSDR-1.3.7-KD5TFD-KB9YIG-QRP-20050612-Binary-withdlls.zip
Bill
At 04:20 PM 6/12/2005, Bill Tracey wrote:
I've posted an experimental version of 1.3.7 @:
Source:
http://www.tracey.org/wjt/sdr1k/PowerSDR-1.3.7-KD5TFD-KB9YIG-QRP-20050612-Source.zip
Binary: <see above>
This contains all I had in the 1.3.5 experimental + some new buttons ( <<
<P P> >>) to tune +/- 50/100 % of the current (Panadapter, Spectrogram,
Waterfall, and Histogram modes). The buttons are typematic so they can be
used to tune across the band fairly quickly.
This driver also contains some experimental stuff for KB9YIG's SDR Sampler
board. On the test tab one can tell the radio the frequency of the
external oscillator and it will setup to allow software tuning +/-
sampling rate/2 around that frequency (similar to 'tuning' an IQ
file). It also disables transmit (temporary restriction), turns off spur
reduction, and pushes all the received audio to the Left channel. If you
set this with an SDR 1000 attached the DDS in the SDR 1000 is set to the
fixed freq entered and you can tune around that frequency as if it were a
fixed freq. piece of hardware. Sort of fun to see how far one can tune
entirely in software.
Bill (kd5tfd)