Ken,
You are absolutely right about all of those controls interacting. There
are so many sliders when you introduce a second sound card that it can
really complicate things. My suggestion would be to find some kind of
standard for most of the controls and then just use 1 or 2 to switch
between modes.
For example, right now we force the main volume and wave out volume to
maximum when using a single consumer card setup. This allows us
complete flexibility in the software and we can still control the input
volume using the MIC / Line In Gain settings. It would be nice to have
this kind of thing built into the software. However, this is more
difficult than it would first seem because we are not restricting the
second sound card to any particular set of sound cards.
I'd like to hear from some others that are using a second card for a Mic
preamp and see how they switch between SSB and digital modes.
Eric
Ken N9VV wrote:
Dear SDR-1000 guys,
I just tried my first SSB contact using a Delta-44, MOBO card for
pre-amp, and 1.3.5 with Bill's mods.
I was confused because I found three MIC-GAIN settings
that all seem to interact:
(a) the MIC gain of the MOBO card and the LINE-OUT level of the MOBO card
(b) the MIC GAIN of the TRANSMIT tab on the Console settings menu
(c) the MIC gain setting on the front of the Console
How do you guys set all those levels? If I want to go back to digital
modes later, how can I save all those SSB settings and get back to
digi levels?
I successfully worked CY9SS is on the air on 17M 18.148.100. I could
say that I "busted the pileup"
but in reality it was just dumb luck :-)
TU de Ken N9VV
_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz