Never mind, I found my editing error..
Now I have ports 8 and 9 showing up (Good) but Ham Radio Deluxe is not
seeing the SDR, guess i will work on that tomorrow.
Sorry for the bandwidth.
73,
Dudley
WA5QPZ
I loaded up Phil's program, vCom, drivers. Loaded without a hitch except
it continues to connect to Com Ports 24 and 25, and the PowerSDR console
only will go only to port 20. I had edited the N8VBvCOM.inf to read
below before I installed. I did try to edit the registry to force port 8
and 9 , but those were reset to Ports 24 and 25 after the reboot. I
would have thought that the first vCom port would have been 8, not 24. I
am currently using 1 through 7 now.
Any ideals?
Thanks and 73,
Dudley
WA5QPZ
;Number Of Pairs
;************
PAIRS=0x01
PAIRS=0x02
PAIRS=0x03
;PAIRS=0x04
;PAIRS=0x05
;PAIRS=0x06
;PAIRS=0x07
;PAIRS=0x08
;PAIRS=0x09
;PAIRS=0x0A
;NOTE: MAX is 10 pairs
;Pair 1
;************
PORT5="COM8"
PORT6="COM9"
;Pair 2
;************
PORT7="COM10"
PORT8="COM11"
;Pair 3
;************
PORT9="COM12"
PORT10="COM13"
;Pair 4
;************
PORT11="COM14"
PORT12="COM15"
;Pair 5
;************
PORT13="COM16"
PORT14="COM17"
;Pair 6
;************
PORT15="COM18"
PORT16="COM19"
;Pair 7
;************
PORT17="COM20"
PORT18="COM21"
;Pair 8
;************
PORT19="COM22"
PORT20="COM23"
;Pair 9
;************
PORT1="COM24" <= ERROR :=}
PORT2="COM25"
;Pair 10
;************
PORT3="COM26"
PORT4="COM27"
_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
