Re: [Flexradio] Help - Winkey Keyer /SDR1K

[Willi Reppel]

Hi Serge,   You can first try to connect a straight key or wire jump to the pertaining contacts of com port 1 and find out if this works. If it does you need probably a relay between the Winkey output and the com port 1. Under www.k1el.com the schematics can be found for an additional relay for the K9 keyer. I use a relay to interface my old Heathkit keyer to the com port 1.   Good luck de SM6OMH  Willi ----- Original Message ----- From: SERGE BERTUZZO To: FlexRadio@flex-radio.biz Sent: Sunday, October 09, 2005 9:56 PM Subject: [Flexradio] Help - Winkey Keyer /SDR1K Hello everyone! I just finished my Winkey keyer and am attempting to use it in conjunction with my SDR1000. So far no luck. I am using version 1.4.4 of the Power SDR software. Keyer connected to computer com port 1.   As far as the settings on the CW options page I have : Manual Mode : I have the external keyer box checked Options : I have keyer selected.   I have the output of the Winkey (Key/PTT) to key input of the SDR using stereo plugs.   I know that the keyer works as I have tried it in conjunction with other contesting software.   Any advice / guidance would be appreciated.   Regards,   Serge VA3SB _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz