Tom Thompson wrote:
Eric2 and Ernie,
I have experienced similar problems when running my amplifier. My
experience is that the SDR-1000 is not very immune to high external RF
fields. Several FSB-1/2 split ferrite beads on the USB cable should
cure the problem. You can get them from:
http://www.Palomar-Engineers.com
Good luck and 73, Tom W0IVJ
ecellison wrote:
Ernie
This is the same symptom we experienced in Belize. In our case it was
probably related to high SWR and radiation in the shack. I think the error
message was "USB not installed", or similar. USB is unchecked in setup after
the error. Solutions were everything from a simple power down of the console
re-checking the usb in setup - to - having to press the power button on the
computer to end a lock up condition of the powersdr.exe, then re-installing
the USB device.
We did not figure it out.
Can also be caused by bad ground loop.
Eric2
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of ERNEST LEONE
Sent: Sunday, November 13, 2005 12:08 AM
To: [email protected]
Subject: [Flexradio] USB port deactivated when MOX is depressed
I am using 1.4.5 beta preview 5, and when I depress the MOX, I get a USP
port error. I checked several times and the USB adapter is checked in the
setup menu, but after the error occurs the box is unchecked. Same problem
with preview 4. I tried uninstalling, and then reinstalling 1.4.4, but now
I get high a SWR message, even into a dummy load, the only difference here
is that the USB port remains activated.
I have been using the radio successfully for the last two weeks, and this
problem just started today
Could it be a hardware problem?
Thanks,
Ernie
NY1N
_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
