Tnx to all who responded. I will check the things suggested and
report back in a couple of days. Tim, I am using the setup you are
except I am using the Firebox sound system.
73, Chas W1CG
At 11:44 AM 12/21/2005, you wrote:
Charles,
Once you verify the items Eric suggested, feel free to contact me off
list. I have MixW 2.16 (no beta) running very well with PowerSDR
1.4.5p7 using VAC, VCOM and the Delta 44 sound card. I'm doing CW
(keyboard) and all ASFK modes.
Is this your basic configuration?
-Tim
---
Tim Ellison ( [EMAIL PROTECTED] )
Integrated Technical Services ( http://www.itsco.com )
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Charles Greene
Sent: Wednesday, December 21, 2005 6:04 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Beginner Needs Help
Hello,
I am trying to set up MixW with the SDR-1000. I have MixW v2.16b8
and SDR-1000 v 1.4.5BP7.
I have problems in both BPSK31 and CW. First BPSK31. I followed the
steps in Bob's paper exactly through figure 12. MixW receives
ok. On Transmit. the power level fluctuates between 0 and 20
watts. I have the TX gain set at 2 and the mike gain set at zero,
power set at 20 watts. If I increase the mike gain, the power
output increases but still fluctuates. When I set the TX gain at 1,
it fluctuates between 0 and 17 watts. The fluctuation can be
described as 1 sec on and 0.1 sec zero power. Measured with external
watt meter.
On CW, when I go to TX on Mix, the SDR-1000 goes key down.
TNX for your help.
73, Chas W1CG
_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
