Mark,

Make sure that you have the mixer settings set correctly on the turtle
beach.  You will want to make sure that the microphone is muted on the
playback side.  This prevents the microphone from feeding back
immediately into the output.  This combined with the mixed/delayed
output from the software will sound like an echo.


Eric Wachsmann
FlexRadio Systems


> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of Marc Franco
> Sent: Tuesday, January 17, 2006 12:10 PM
> To: [email protected]
> Subject: [Flexradio] Question on TX echo
> 
> Hi all,
> 
> I have been digging the reflector archive looking for
> a solution to the TX echo, but whatever I tried so far
> did not work.
> 
> I can hear the echo without hardware. That is, I plug
> the microphone directly into the sound card mic input,
> and headphones into the line output. I set the Power
> SDR to TX on SSB, and I can clearly hear a strong
> echo. The results are identical transmitting with the
> hardware and listening with another receiver and
> headphones. I even tried the old VB console and it did
> the same.
> 
> I made sure it was not a problem with the mixer. The
> echo happens with a Santa Cruz and with the Dell
> original sound card. I have uninstalled them in
> sequence, and made no difference. The mic boost is
> disabled as well. I have no effects turned on. I do
> not have the Santa Cruz mixer installed, just the
> drivers.
> 
> I reduced the buffer size to 512 (both ASIO and Power
> SDR), and it made the echo delay shorter (and less
> noticeable), but it is still present.
> 
> It sounds kind of nice on AM/FM, but it is a nuisance
> on SSB.
> 
> Am I missing something else? Would it completely go
> away with a Delta 44?
> 
> Thanks,
> 
> Marc N2UO
> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> 
> _______________________________________________
> FlexRadio mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz


Reply via email to