>I did correct the problem of the loud audio CLICK after PTT. This only shows up in the v.1.6.2 version with the same database as v.1.6.1, I raised my audio buffer from 512 to 1024, everything sounds great now.
73's WD5Y Joe Upon further testing I think there may be some issues in v.1.6.2 on TX to > RX > turn around in SSB. I now have a rather vicious very loud audio CLICK in > the > speakers after releasing the PTT in SSB. This is not present in vx.x.1. > > Any others with this click ?? > > -Dan > > ----- Original Message ----- > From: "k5nu" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, June 23, 2006 9:06 PM > Subject: Re: [Flexradio] 1.6.2 > > >> Dan, Thanks for the message. Turning X2 sequencing off had no effect. >> Actually, as the foot switch is pushed on and off, I hear multiple >> relay >> clicks in the sdr as apposed to the single click heard with 1.6.1 using > the >> same set up. The ON button hangs red, the USB and 20 buttons are dark >> and >> don't respond to the mouse. Also the VFO options A>B etc. are all >> dimmed >> inactive. A click of the MOX restores. Then a push of the footswitch > hangs >> it again. 1.6.1 has no such problems. I imported the same database >> into >> 1.6.2 to no avail. >> >> 73, Mike K5NU >> ----- Original Message ----- >> From: <[EMAIL PROTECTED]> >> To: <FlexRadio@flex-radio.biz> >> Sent: Friday, June 23, 2006 10:09 PM >> Subject: Re: [Flexradio] 1.6.2 >> >> >> > Check your setting on General> Options [ Enable X2 TR Sequencing].. > Click >> > this option to OFF and see if it helps. Also assure that the numeric >> X2 >> > Delay dialog box is set to something reasomably low (150ms for > example...) >> > if the Option is ON.. >> > >> > -Dan >> > ----- Original Message ----- >> > From: "k5nu" <[EMAIL PROTECTED]> >> > To: <FlexRadio@flex-radio.biz> >> > Sent: Friday, June 23, 2006 5:51 PM >> > Subject: [Flexradio] 1.6.2 >> > >> > >> >> When operating 1.6.2, the ptt hangs. Still goes back to receive, >> but > the >> > ON button stays red, and the scanner and vfo box is dim. I have > imported >> > database from 1.6.1. The 1.6.1 works fine with the same settings. >> >> >> >> What am i overlooking? 73, Mike K5NU >> >> -------------- next part -------------- >> >> An HTML attachment was scrubbed... >> >> URL: >> > > /pipermail/flexradio_flex-radio.biz/attachments/20060623/f03ccf37/attachment >> > .html >> >> _______________________________________________ >> >> FlexRadio mailing list >> >> FlexRadio@flex-radio.biz >> >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> >> Archive Link: >> http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> >> FlexRadio Homepage: http://www.flex-radio.com >> >> >> >> >> > >> > >> > _______________________________________________ >> > FlexRadio mailing list >> > FlexRadio@flex-radio.biz >> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> > FlexRadio Homepage: http://www.flex-radio.com >> > >> >> >> >> > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
