On 7/31/06, Eric Wachsmann <[EMAIL PROTECTED]> wrote: > Please use a great deal of caution when adjusting the output mode of the > Delta 44. Switching from -10dBv to +4dBu takes the voltage from a safe > 0.98VRMS max to a whopping 4.3VRMS max. This higher voltage will almost > surely damage the SDR-1000 (specifically, IC2 on the TRX board) if you were > to transmit under these conditions. This is why we automatically set the > outputs to -10dBv each and every time you start the PowerSDR software.
Eric, Maybe I'm missing something, however are we not talking about the output from the Delta-44 to the speakers or headphones? How will this possibly damage the SDR? I didn't think that output had anything to do with inputs to the SDR1K. I would never suggest changing input levels to the SDR FROM the D-44. Where am I going wrong? Again... _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
