Mine does the same thing. Dell P4 2.8GHz.
After the initial instability it is solid. David KM5TZ ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, August 18, 2006 5:53 PM Subject: [Flexradio] Receive dropping out > When I first turn on my Flex and press the "On" button in the console, it > will start receiving fine for a second or two and then the receive will drop > out. I can still hear some background static, but no signals. I usually > have to cycle on/off 1 to 5 times before the receive will "stay" on. After > this, the rig will always be fine and not drop out while in use. Maybe once > or twice in 3 months, it has dropped receive after transmitting. Tapping > the MOX on and off restored the receive. > > I've tried starting the computer first and the sdr first and that doesn't > seem to make any difference. > > Does this happen to anyone else? I'm thinking it might be a symptom of my > 3.3v parallel port barely flipping a relay. But if that were the case, it > seems odd that it will ALWAYS receive for a second or two at least when I > first turn it on and works fine after it has been on. And I'm sure other > people with 3.3v would be having problems too. Any thoughts? No other > problems. Transmits and receives fine otherwise. Power supply holds 13.8v > fine. > > So far, it's really not a big deal to me as long as it works ok after the > cycling. More curious than anything else. > > Thanks & 73', > Jeff/KA5MIR > > _______________________________________________ > FlexRadio mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
