Gerald Capodieci wrote: > If it's new hardware you need to enter the printed settings or run the > calabrate program. > > */David Ackrill <[EMAIL PROTECTED]>/* wrote: > > > Do I need to re-enter the Test Results, on the paperwork that came > with > the rig, or is it safe to just run the calibration routine with the > default values, I wonder? >
Ah, well then I've been 'belt and braces' as I've been entering the Test Result settings and then running the calibrate program. However, it's a good job my dummy load is oil filled, and rated for 50W continuous and at least 100W on a 50/50 duty cycle, as the calibrate program has been hitting over 100W both on the PowerSDR display and on my power meter... I'll take another look at the set up, and make sure it's not trying to overdrive the system. Dave (G0DJA) _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
