Chas, I used once the external audio from a keyer to create cw signals. This was before the SDR1k keyer did work properly. The problem was that the tone of my keyer had harmonics which created additional un-wanted cw signals. However, you could use the new sub-rx function and look for replies to your call at two different frequencies. HI
vy 73 Willi ----- Original Message ----- From: "Charles Greene" <[EMAIL PROTECTED]> To: <FlexRadio@flex-radio.biz> Sent: Tuesday, October 03, 2006 3:14 AM Subject: [Flexradio] External Keyer Audio and FireBox > Hi, > > I have a question concerning external audio from a keyer and the > FireBox. Can I connect this audio to input #2 of my FireBox and > listen to it when I key the SDR-1000 for CW with the keyer? Input #1 > is in use for the mike, input #2 is unused and it has its own gain > control. I don't want to transmit a tone modulated CW > signal without my knowledge which may happen. The keyer sound going > into my headphones would be a plus. > > Chas > > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com