The microphone connector on the front of the SDR-1000 does _not_ feed
the audio signal to anything inside the box; only the PTT circuit
connects to the electronics. The small mic jack on the back of the
SDR-1000 is directly connected to the connector on the front. The mic
audio has to go into the FA-66 no matter what. The idea is that if you
use the front connector, you need to supply a cable from the jack in the
back to the FA-66.
Chris - AE6VK
-----Original Message-----
From: Army Curtis - AE5P [mailto:[EMAIL PROTECTED]
Sent: Monday, January 15, 2007 4:06 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Mike inputs with Edirol FA-66
Hello all,
Using the Edirol FA-66 sound box. When I connect a Heil headset mike
directly to mike input 1 on the FA-66, it works like a champ. When I try
and
connect a microphone either to the mike jack on the front of the SDR-1K
or
to the miniature phone jack on the back of the SDR, no transmit audio at
all. Is it possible to have a microphone connected to the SDR when using
the
FA-66, or must any and all microphones be connected directly to the
FA-66?
Thanks very much for any help.
Army Curtis - AE5P
Nacogdoches, the oldest town in Texas
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.10/626 - Release Date:
1/14/2007
8:29 PM
_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
_______________________________________________
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
