Thanks Eric for the explanation.. Frank ----- Original Message ----- From: Eric Wachsmann To: 'Frank Mayer' ; 'Dave Muskopf' ; [email protected] Sent: Wednesday, March 14, 2007 11:23 AM Subject: RE: [Flexradio] BCI filter
That is correct. The BCI filter is simply detuning the BPF from the 160m band to the 60m band. You WILL lose some signal in the detuning... this is what keeps the in-band signals from overloading the front end. The reason 807X does not appear to lose signal is because the meter and the display are being adjusted to compensate for the loss. Eric Wachsmann FlexRadio Systems ________________________________________ From: Frank Mayer [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 13, 2007 6:58 PM To: Eric Wachsmann; 'Dave Muskopf'; [email protected] Subject: Re: [Flexradio] BCI filter Now when the BCI Rejection button is activated every signal on 160 is reduced. 807X does not do this. Since there are lots of night time signals on the band I can't tell until tommorow about the broadcast interference. -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.11/721 - Release Date: 3/13/2007 4:51 PM -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070314/0ee5ebcc/attachment.html _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com/ FlexRadio Knowledge Base: http://kb.flex-radio.com/
