I ran a few tests with ANF while listening to 60m Ch2 this evening: 1) Playing around with the various settings in the setup panel (Taps, Delay, Gain) had no effect on the carrier present in the passband. Note that Block LMS was ON.
2) On turning Block LMS OFF, the carrier's audio comtribution is pretty well suppressed; the remaining SSB audio is somewhat distorted with Taps, Delay, and Gain at the default settins of 65, 50, 25 respectively. 3) I noticed that when I now toggle Block LMS ON, the Taps and Delay controls are disabled. Toggling Block LMS OFF enables them again. This was not the initial state when I first displayed the setup dialog - all three were enabled with Block LMS enabled. So, it would appear that a) the Block LMS feature might be misbehaving and b) there is a UI issue with initial enable/disable of controls based on the current Block LMS state. These tests were performed with SDR-X SVN:1145 Pete, N3EVL ----- Original Message ----- From: "Robert McGwier" <[EMAIL PROTECTED]> To: "Larry Taft" <[EMAIL PROTECTED]> Cc: "'Flexradio'" <flexradio@flex-radio.biz> Sent: Tuesday, April 17, 2007 11:50 AM Subject: Re: [Flexradio] ANF > WELL PHOOEY, that won't do. We will have to work on how optimize the > settings,etc. > > I love the ANF and NR but the father is often blind to the shortcomings > of the child! > > ;-) > Bob > N4HY > > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
