Everything worked fine with my Pentium 4/Intel 2.8 MHz main-board using a ultra
ATA/100 Seagate internal drive and a Delta 44. I added a SATA II Maxtor/300 and
the noise began. The noise sounds like ignition noise by a near by engine
idling. When I disconnect the SATA cable from the main-board the noise stops.
Noise is present even with power to the SATA drive is disconnected. NB
surpression has no effect. Has anyone solved this one?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070501/5b0e5c71/attachment.html
_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/
