Hi, Well, it seems to me that if VE3NEA can do it, then the FlexRadio software engineers can too. I do have a FireBox. so I will try it per below.
73, Chas W1CG At 04:30 AM 5/31/2007, Giuseppe Campana wrote: >Hi > >for all interested increase the audio performance in his SDR1K, >please look at this VE3NEA software: http://www.dxatlas.com/vshaper/ > >I use it with the on board audio of my P4, placing the out to input of >my FA66, with outstanding performance: EQ/RFclipper/Gate. > >If you have Firebox, you can use MIC2 input, 5/6 output route to MIC1 input. >You can use VAC, but some latency is sure. > >Speaking at normal level on a few Euro mic, I get more punch than >the audio path of PowerSDR, without distorsions or noise. > >The CPU usage is very low (3/5%), ASIO support and real time. > >Alex has write a great piece of software for this branch. > > >73 Beppe >IK3VIG > > >_______________________________________________ >FlexRadio mailing list >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >FlexRadio Knowledge Base: http://kb.flex-radio.com/ >FlexRadio Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
