In that case, it sounds like either the ATU or some circuitry that connects to it is causing problems. You really need to contact our support team as they are going to be your best chance for a solution to this problem.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: Ruben Navarro Huedo [mailto:[EMAIL PROTECTED] > Sent: Wednesday, August 15, 2007 10:49 AM > To: Eric Wachsmann; FlexRadio List > Subject: Re: [Flexradio] sdr-1000, problem with atu] > > Eric Wachsmann escribió: > > Now we're getting to the root of the problem. There is a single wire > that > > returns information from the PA and the ATU. It sounds like it no > longer > > has electrical connection. I would suggest getting in contact with our > > support team using the resources available on our website (goto > > www.flex-radio.com and click on Support -> Service and Repair. > > > > > > Eric Wachsmann > > FlexRadio Systems > > > > this is extrange ... very extrange. > I load powersdr -> click MOX -> I CAN read FWD and REF PWR > I click TUNE -> listen ATU and PowerSDR gives error -> after that i > can't read FWD and REF PWR. > I don't understand anything :-( > I am really lost. > > SDR is connected to a Palstar dummy load. > > Thank's a lot all for your help. > > -- > Ruben Navarro Huedo > http://www.palotes.com > http://www.cabodesantapola.org _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/