Hello Alan, Which method were you using to change frequency, and how fast were you changing frequency when this happened? Were you dragging the mouse on the panadapter display, or tuning via the mouse wheel, or via the keyboard arrows, or via the Shuttle Pro? What were your tuning steps set to?
73, Dale WA8SRA Alan NV8A wrote: > I am certain that this has happened only since I installed the new > firmware that was released last weekend: > > Sometimes when I change frequency the sound will cut out and the display > will freeze, then a second or two later I will hear a "ding" as though I > had unplugged a device. Clicking the "Remove hardware safely" icon shows > no FLEX-5000 connected, and if I power down the FLEX then power it up > again, I hear the "dings" as it reconnects. > > The PC has an AMD dual-core 64 X2 3800+ with 1GB RAM. The Firewire card > is an Adaptec using an Agere chip and has IRQ 17 all to itself; WinXP > Home says the device is working properly. I cannot find an updated > driver for the card. > > Anybody else seeing this? Any ideas? > > 73 > > Alan NV8A > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > > > > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
