Actually, the PC does include a COM port on the FLEX-5000C.  ;)  Even if it
didn't (or if you needed more than one), you could always do USB to serial
though.


Eric Wachsmann
FlexRadio Systems

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of Tim Ellison
> Sent: Thursday, November 22, 2007 11:31 AM
> To: Tim Ellison; William Hein; [email protected]
> Subject: Re: [Flexradio] controlling Flex-5000C & logging on a second
> computer?
> 
> I just realized that the F5Kc has no external comport.  and no slot to
> install one in the PCI bus DOH!
> 
> There is no easy way to install a real comport other than using a USB to
> serial cable.
> 
> 
> -Tim
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of Tim Ellison
> Sent: Thursday, November 22, 2007 12:23 PM
> To: William Hein; [email protected]
> Subject: Re: [Flexradio] controlling Flex-5000C & logging on a second
> computer?
> 
> Use a real com port and real null modem cable rather than the virtual com
> port created by using vCom.
> 
> 
> 
> -Tim
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> radio.biz] On Behalf Of William Hein
> Sent: Thursday, November 22, 2007 8:09 AM
> To: [email protected]
> Subject: [Flexradio] controlling Flex-5000C & logging on a second
> computer?
> 
> I want to use my main shack computer for logging and rig control of the
> Flex-5000C, treating the 5000C like I would any standalone rig.
> 
> I have a SO2R operation and the station computer controls two rigs, one of
> which is being replaced by the 5000C, plus two PAs, antenna switching and
> BPF routing.  It is not practical to migrate all these functions to the
> 5000C.  (Also, I have four LCD monitors connected to the main shack
> computer.)
> 
> Doesn't seem to be anything in the 5000 manual regarding this.  The manual
> assumes everyone will use the 5000C for logging as well as PowerSDR,
> connecting via VAC.
> 
> Suggestions?
> 
> 73,
> Bill NT1Y
> 
> 
> _______________________________________________
> FlexRadio mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage:
> http://www.flex-radio.com/
> 
> 
> _______________________________________________
> FlexRadio mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage:
> http://www.flex-radio.com/
> 
> 
> _______________________________________________
> FlexRadio mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/
> FlexRadio Homepage: http://www.flex-radio.com/



_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Reply via email to