I have a problem sending CAT commands to PowerSDR. I have tried various combinations of 1) Four different computers (XP Home and XP Pro) 2) Three different versions of PowerSDR 3) PowerSDR demo mode versus running my Flex-1K. 4) Two different programs for virtual com port. 5) Computer-to-computer com port using COM to USB, USB to COM, COM to COM and USB to USB. 6) Four different programs to control the Flex via CAT (Kenwood commands). 7) Various serial settings example 9600:N81
I always have the same problem: Everything works fine for a variable amount of time (usually 2 or 3 minutes to 2 or 3 hours) then all of a sudden all CAT control stops. I need to go into SDR CAT tab and toggle the "Enable CAT" checkbox, then everything starts to work again for a while. I am trying to use my Flex SDR 1K as remote controlled HF receiver, but somebody needs to toggle this checkmark several times a day. Any advice would be appreciated, 73, Doug VE3EFC _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
