There is further progress today on this front. Eric will report after testing is complete with a beta group. Thanks, Gerald
Gerald Youngblood, K5SDR President FlexRadio Systems 13091 Pond Springs Rd. #250 Austin, TX 78729 Phone: 512-535-4713 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Beumer WA3FDB Sent: Tuesday, February 19, 2008 11:16 PM To: 'Jerry'; flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex 5000 Ditto here -- 3 days after upgrading firmware I had one lockup running 1.1.10 SVN 1979 Running Pentium Q6600 2.4Ghz with 4GB dedicated machine.. Frequency of occurrence has decreased.. Dave WA3FDB -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Sent: Tuesday, February 19, 2008 7:52 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex 5000 Hi All Thought the sticking had been cured. But! This afternoon when working the 9X on RTTY it happened and this time it did not want to go back to recv by clicking on the MOX button! Hit "tune" twice and thank goodness it went back to full receive. Thirty seconds later the 9X came back to my call. I had the shakes, thinking that if he had come back to me while the Flex-5K was stuck. I might not have been able to work him for number 336. I had dual recv and split on. listening on 089 and xmiting on 091 or there abouts. Putting out about 1.2kW. Was jumping around with the second recv trying to tail end. Don't think I transmitted more than 10 or twelve times before the radio became deaf. Using firmware 1.1.10 and SVN 1979. 73 de Jerry At 06:44 PM 2/19/2008 -0500, you wrote: >My experience is similar, but I don't relate it to RF. The longer the Flex >is turned on, the more frequent the lockup problems. However the new >firmware did seem to reduce the frequency. In my case it's an AMD 6000+ >dual core with 2 meg of memory running XP Pro. The CPU useage is around 10% >under normal circumstances. I also don't think it's heat, as I'm running >SSB with a very low duty cycle. I've felt the case when the lockup occurs >and it's not the least bit warm. > >I have not been able to make the Flex lockup, it seems completely random. >Also in my case, I am often running the recorder continuously while using >the Flex. > >de Rick, KN3C > > >"Downloaded the new firmware 1.1.10, SVN 2000, keyed and unkeyed radio >with MOX many times(30) no drop out of receive, until joining a QSO >then after several transmissions the drop out returned. Could it be >that when RF is present it causes the problem? >Dave-W4DWG" > >No virus found in this outgoing message. >Checked by AVG Free Edition. >Version: 7.5.516 / Virus Database: 269.20.4/1277 - Release Date: 2/13/2008 >20:00 > > > >_______________________________________________ >FlexRadio Systems Mailing List >FlexRadio@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ > > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
