Also want to add that the receive drop does not occur on CW mode. With delay set anywhere from 50ms to 300ms, always goes back to receive. I have never encountered a failure while operating CW. The receive lock up only happens when using Digi or USB/LSB. The lock up is very random and maybe 5% of the turn overs. Hitting MOX will bring the receive back. This with the latest firmware and latest SVN.
73 John, N3WT -------------- Original message -------------- From: David Gardner <[EMAIL PROTECTED]> > Operating on 75 meters for about 4 hours, the receiver locked up once, I > also noticed a high SWR warning when transmitting into a known 1 to 1 > match, but just one time in 4 hours of operation, then the radio locked > up again after further operation and would not receive and would not > reset by hitting mox. It would still transmit but no receive. I went > back to Firmware 1.1.10 and radio operated normally. I tried 1.1.11 > again and the radio locked up after several transmissions. I tried using > 1.1.11 again this morning with the receive locking up again. Using a > P-4 3.2, L2,2 gig ram computer. > Dave-W4DWG > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kb.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/