It's availabe in CW mode as well, right beneath the "Disable Monitor" checkbox. I use it all the time in split mode to show my position within the pileup. (Standard version of PowerSDR)
Dale Don wrote: > Found it. It is available when you are in ssb mode only and is located > under the transmit profile in the Mode Specific Controls - Phone. > > Don > >> Dale Boresz wrote: >> >>> Don, >>> >>> There is a single checkbox located on the main screen of PowerSDR, to >>> do this. >>> >>> For CW mode, it's located beneath the CW Speed slider, and for SSB >>> mode, it's located beneath the Transmit Profile dropdown list. >>> >>> 73, Dale >>> WA8SRA >>> >>> Don wrote: >>> >>>> I am trying to recall how I enabled the display of the XMT filter on >>>> the screen - it is displayed in yellow - as I am trying to do the >>>> same with k6jca's display. I went through the manual and I must >>>> have missed it. >>>> >>>> Don - kx9q >>>> >>>> _______________________________________________ >>>> FlexRadio Systems Mailing List >>>> [email protected] >>>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >>>> Knowledge Base: http://kb.flex-radio.com/ Homepage: >>>> http://www.flex-radio.com/ >>>> >>>> >>>> >>>> >>>> >>> > > _______________________________________________ > FlexRadio Systems Mailing List > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kb.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > > > > _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
