Brian, Although I believe there was some initial intent to include the digital modes in PowerSDR, it was decided not to re-invent the wheel. There are so many excellent digital mode programs out there, it was better to focus the limited programming resources on improving PowerSDR.
Now, to answer your real question. There is a 3rd party program called Virtual Audio Cable (VAC) which creates audio "cables" in software. These virtual cables are used to pipe the audio between PowerSDR & a digital mode program such as MixW or DM780. Unfortunately VAC is not free, but it is reasonably priced at $30. There are several articles in the Knowledge Base on the FlexRadio website that discuss the use of VAC with PowerSDR & digital mode programs. The following article gives step-by-step instructions on how to set up VAC. The article is a little dated, but is still a good starting point. http://support.flex-radio.com/Downloads.aspx?id=117 It is possible to download a free trial version of VAC. However, the trial version inserts the word "TRIAL" into the audio stream every few seconds, making it unusable for on-the-air tests. Once you register the product, you can download a version without that annoying message. 73, Ray, K9DUR _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/