That should work too. Lots of ways to do this.
Eric -----Original Message----- From: Ray, K9DUR [mailto:[EMAIL PROTECTED] Sent: Thursday, July 17, 2008 2:48 PM To: [EMAIL PROTECTED]; 'Ruben Navarro Huedo'; flexradio@flex-radio.biz Subject: RE: [Flexradio] Is possible mute one band? Eric, Can't you edit the BandText table to disable transmit on any given frequency range? 73, Ray, K9DUR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann Sent: Thursday, July 17, 2008 11:05 AM To: 'Ruben Navarro Huedo'; flexradio@flex-radio.biz Subject: Re: [Flexradio] Is possible mute one band? There's not really a way to do this per se. But you could go to each band that you don't want to transmit on and adjust the power down to 0. This would be remembered and would prevent you from putting out anything that would harm the hardware. Eric Wachsmann FlexRadio Systems -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ruben Navarro Huedo Sent: Thursday, July 17, 2008 10:00 AM To: flexradio@flex-radio.biz Subject: [Flexradio] Is possible mute one band? I have at this moment 2 antennas: One for 10,12,15,17 and 20 and another for 40 meters. I don't have antenna for 30, 80 or 160. Is possible mute transmitd in that bands? I think it is interesting for not damage finals. TNX a lot. -- _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/
