THIS IS A HAM ONLY computer but does connect to home network and to inet for cluster data.
Right this minute, I have two different logging programs running. I have a cluster program that feeds cluster spots to both of the above programs I have called and worked some of those stations. dual monitors on a 3.2 Dell. PWSDR svn 2365 of W2RF RX2 test program. PWSDR reports cpu use at 32% I think I just heard a fraction of a hearbeat of dropped audio and no dropped audio when I was transmitting. DDTu is controlling all those com ports (takes 10 com ports to connect all this crap) via Com0Com and VAC 4.9. A few moments ago, I was on 30 cw with CWSkimmer via VAC decoding a full 192 bandwith of cw signals. Now I went to 30 PSK with a 5.0k bandwidth (that's as wide as WinWarbler can handle) and is decoding 15plus PSK signals. During the 30 meter PSK, I was not aware of any hiccups. During the 30 meter cw with CWSkimmer (it reported 6% cpu use) I did not hear any hiccups. So what am I doing wrong here? PWSDR Safe Mode Level 1 VAC buffer size of 412 sample rate 48000 Primare Audio buffer 2048 Sample Rate of 192000 DSP Buffers are all 4096/2048 for all 3 modes _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/