One of the updates recently imposed along about the time of sp3, but NOT sp3, caused the hardware ints to show about 45% of my AMD64X2 4600.
Backed off to sp3 and OK. Tomorrow or so I will determine which *&[EMAIL PROTECTED]& update is the culprit. Unless somebody tells m which one first! Jim -W4YXU Don wrote: > Starting today I have experienced an unusual problem. I will be > receiving and after about a minute or two the rx will stop. I have to > press the stop button and then press it again (start). Nothing has > changed and I even reset the database but to no avail. It was running > fine over the entire weekend. I turned off the computer and radio and > waited a few minutes and started the PC again. After the PC was up and > running for a few minutes I then started the radio and still experienced > the same problems. I should add I have been using SPDR 1.12.1 and > firmware 1.2.0.3 and firewire driver 3.0.0.0.70. I have not experienced > this before. I have buffer set to 96k and 1024 buffers matching the > control panel setup. I have even tried the test version along with > w2rf's version and I still experience the same problem. HELP! > > Don - kx9q > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kb.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > > > AVG sez OK! > Checked by AVG - http://www.avg.com > Version: 8.0.138 / Virus Database: 270.5.6/1578 - Release Date: 7/28/2008 > 5:13 PM > > > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kb.flex-radio.com/ Homepage: http://www.flex-radio.com/