Subject line rebranding done and extraneous messages removed. Although Julius' stuff is the BOMB (an excellent piece of audio gear), and I do have the EQplus, I no longer use it on my FLEX-5000 or FLEX-3000. I just use the internal 10-band EQ and feed the microphone straight in. I was using the EQplus initially with the FLEX-3000 so that I could get a Heil iC microphone element working (it requires a bias voltage). I have switched to using just the PR-40 for both rigs.
-Tim ________________________________ From: Larry da Ponte [mailto:n7bcp.la...@gmail.com] Sent: Sunday, June 21, 2009 11:12 PM To: Tim Ellison Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] It Works!! No more RFI***************** This thread may be morphing so feel free to rebrand the subject :) Tim - makes sense - will try the external receiver to monitor - I noticed you use a W2IHQ EQ - is this what you're talking about or the use of the PowerSDR EQ? On Sun, Jun 21, 2009 at 8:07 PM, Tim Ellison <telli...@itsco.com<mailto:telli...@itsco.com>> wrote: Larry, if you get a chance to listen with another receiver to your transmitted audio, that will help. The Monitor is not limited to 3K like most receivers (that are not FLEX SDRs) so your voice will sound a little different over the air and may need some additional EQing to get it sounding good on one of those old style radios with detectors and firmware defined DSP chips :-) -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz<mailto:flexradio-boun...@flex-radio.biz> [mailto:flexradio-boun...@flex-radio.biz<mailto:flexradio-boun...@flex-radio.biz>] On Behalf Of Larry da Ponte Sent: Sunday, June 21, 2009 10:57 PM To: Tim (W4TME) Cc: FlexRadio Reflector; Harold Rosee Subject: Re: [Flexradio] It Works!! No more RFI***************** I recently wired a Heil PR-781 to my Flex 3K and it sounds very full- bodied through the monitor - will give a full report after Field Day is over as the 3000 will be the center of attention during the event. In fact the 3000 is generating a lot of interest by local hams who want to come over and see. -Larry _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
