IO test will fail unless you have the appropriate hardware "gig" to provide the correct electrical feedback for the test.
Look like you are good to go. -Tim -----Original Message----- From: Mark Lunday [mailto:mlun...@nc.rr.com] Sent: Thursday, July 16, 2009 12:41 PM To: Tim Ellison; mcha...@theriver.com Cc: k9...@rnacs.com; flexradio@flex-radio.biz Subject: RE: [Flexradio] More strong-signal adjacent images Affirmative. I went back again and this time ran ALL tests. Everything passes, except IO. All IO tests fail. Not sure if that is important or not... Mark Lunday WD4ELG wd4...@arrl.net http://wd4elg.net -----Original Message----- From: Tim Ellison [mailto:telli...@itsco.com] Sent: Thursday, July 16, 2009 10:11 AM To: mcha...@theriver.com Cc: mlun...@nc.rr.com; k9...@rnacs.com; flexradio@flex-radio.biz Subject: Re: [Flexradio] More strong-signal adjacent images Did you use a clean db and disconnect all antennas? -Tim _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
