The send and paste buttons are too close :-) Use the Knowledge Base, Grasshopper. http://kc.flex-radio.com/KnowledgebaseArticle50371.aspx
Also there are caveats when running calibration tests Again the KB is the all knowing SDR oracle... http://kc.flex-radio.com/KnowledgebaseArticle50140.aspx -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mark Lunday Sent: Wednesday, July 15, 2009 10:38 AM To: 'Ray Andrews, K9DUR'; mcha...@theriver.com Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] More strong-signal adjacent images Terrific info. What are normal operating ranges for the final temps? Mark Lunday WD4ELG wd4...@arrl.net http://wd4elg.net -----Original Message----- From: Ray Andrews, K9DUR [mailto:k9...@rnacs.com] Sent: Wednesday, July 15, 2009 10:09 AM To: mcha...@theriver.com; 'Mark Lunday' Cc: flexradio@flex-radio.biz Subject: RE: [Flexradio] More strong-signal adjacent images Mike, Ctrl-Shift-P brings up the test screen where you can calibrate the TX & RX1 for level, images, etc. Ctrl-Shift-R brings up the equivalent screen for RX2. Also, Ctrl-Shift-I displays a screen which allows you to monitor the power supply voltage & the temperature of the finals. These key combinations are not documented in the manual. 73, Ray, K9DUR _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com