Tim, For the bias and power calibration, I thought also required is the Array Solution PowerMaster Monitor connected to a serial port for accurate power output data . Is this correct?
John N3WT -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Tim Ellison Sent: Thursday, August 13, 2009 1:03 AM To: Clay W7CE; flexradio@flex-radio.biz Subject: Re: [Flexradio] [SPAM] Re: Power meter reading You may need to do a bias and power calibration. It only requires a 100 watt dummy load. -Tim -----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Clay W7CE Sent: Thursday, August 13, 2009 12:05 AM To: flexradio@flex-radio.biz Subject: [SPAM] Re: [Flexradio] Power meter reading I've been seeing the same thing here for a while on my 5000A, although I'm not sure exactly when it started. According to my PowerMaster wattmeter, the output power is fine but the PowerSDR wattmeter is reading low. I'm running the latest versions of the software, firmware and driver (1.18.2, 1.3.0.06 and 3.4.0.5254, respectively). I was also seeing this on PowerSDR 1.18.1. 73, Clay W7CE ----- Original Message ----- From: "dick kalt" <w1...@optonline.net> To: <flexradio@flex-radio.biz> Sent: Wednesday, August 12, 2009 5:14 PM Subject: [Flexradio] Power meter reading > For some time now I've been seeing a dramatic reduction in RF power output > on the meter. I seem to be driving my linear to a reasonable level when I > use it which indicates to me that it's more of a meter function that > actual > output, but when I put the 5KA in the tune position it indicates 3 watts > out > when I used to see 10 watts. On sideband I used to see average output from > 20 to 30 watts give or take, but now it shows between 0 and 10 watts, > little > movement. I deleted the database and had it rebuild but I'm still seeing > low > power out indication. Am I missing a setting? > > Thanks and 73, > Dick, W1FYI > > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > Message delivered to w...@curtiss.net _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to telli...@itsco.com _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to n...@comcast.net _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com