That is the latest one thst installs the OLD way, so if you have that installed, you can go ahead with the new driver.
Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 242 0911 Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Dec 12, 2009 at 2:22 AM, Erik Jakobsen <e...@urbakken.dk> wrote: > > > > > Because current FLEX-x000 firmware with a version number of 1.x.x.x > > was created with an older version of the Firewire driver, you CAN NOT > > upgrade 1.x.x.x based firmware with the new 3.5.0.7171 Firewire driver. > > > > Therefore, you should upgrade your radio's firmware to the latest > > 1.x.x.x version BEFORE installing the updated FLEX Firewire driver. > > If you do not do this or need to revert to a earlier version of > > firmware after loading the new driver, the firmware install process > > becomes a bit more difficult due to the firmware binary and driver > > dependency that exists. > > > 1.3.0.8 is ok or ? > > 73s-Erik-OZ4KK > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > Message delivered to nealk...@gmail.com > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com