I am currently running an "i-box" in line which is the isolatioin transformer etc.. Ok I might give the rear flex port a go so I can upgrade the cabling to something more substancial than Cat5 network cable!
-----Original Message----- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison Sent: Monday, December 14, 2009 9:10 AM To: Dave; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Audio from rack into Flex3000 That is a very good point, Dave. An isolation transformer is also a best practice. -Tim -----Original Message----- From: Dave [mailto:rocke...@gmail.com] Sent: Sunday, December 13, 2009 5:06 PM To: Tim Ellison Subject: Re: [Flexradio] Audio from rack into Flex3000 Also make sure you have the correct impedance matching between the rack equipment and the Flex. An I-Box or similar device will help ensure correct matching. Dave wo2x _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to anth...@consultexcel.com.au _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to arch...@mail-archive.com
