Hi All,
I've finally got my brand new Flex3000 on air and have to say I am
very pleased with the receiver performance!
The filtering on CW is truly amazing!
So my first real question to the group :)
Flex3000
PSDR v1.18.5
FW Driver v3.5.0.7171
F3K Firmware v1.2.5.6
in PSDR you can set the meter to read SWR during TX, which I have
done, however regardless of the real SWR
as measured on my SWR meter connected inline, the PSDR SWR reading is
always 0.0:1, however if I set the meter
to REFPWR it shows a power reading when the SWR is high, IE: 2:1
which is correct.
So can someone please do the same test and see if they get the same
result, IE: the PSDR SWR reading is always 0.0:1?
If it works for you guys then perhaps my new F3K is faulty?
I hope not, although the first one from the UK importer was DOA!
I look forward to hearing from you.
Thanks.
Mike
M0AWS / F5VKM
http://www.f5vkm.com
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/