Ok, Neal, here is my configuration...please keep in mind that I am a new user 
of HRD +DM780 and thus may not be that familiar with all of its features and 
its setup.

I use the N8VB VComConfigurator to create virtual Com ports 6 and 16. PowerSDR 
has CAT Enabled and utilizes Com 6. HRD is configured to connect via Com port 
16. DM780 uses HRD for PTT switching. (I did not select PTT switching via Com 
port because it requires a dedicated Com port and as I mentioned before, HRD 
utilizes Com 16.)

I realize that the IC-7700 uses a hardware Com port (Com 1) to connect to HRD + 
DM-780 and the Flex-3000 uses a virtual Com port pair (via HRD in my case) to 
accomplish the connection, but I would expect quicker response from the Flex 
unless my setup is not optimum.

Thanks in advance for any advice!

Ed, K0KC




________________________________
From: Neal Campbell <nealk...@gmail.com>
To: Ed Wilson <ed.wil...@ymail.com>
Cc: G7DCT <g7...@the-horsfalls.co.uk>; adam grossmyer <agg...@gmail.com>; 
"flexradio@flex-radio.biz" <flexradio@flex-radio.biz>
Sent: Thu, May 13, 2010 7:10:45 PM
Subject: Re: [Flexradio] Transmit delay

Are you using HRd to do the ptt switching or are you using comm port ptt?

73,
Neal

On Thursday, May 13, 2010, Ed Wilson <ed.wil...@ymail.com> wrote:
> I have not tried Minideluxe, but I have the delay problem with HRD + DM780 
> and my Flex-3000 as well. When I use HRD + DM780 with my IC-7700, switching 
> is very fast. If the problem is HRD generating lots of CAT data, why can't 
> the Flex handle it while the IC-7700 seems to be able to deal with it?
>
> Ed, K0KC
>
>
>
>
> ________________________________
> From: G7DCT <g7...@the-horsfalls.co.uk>
> To: adam grossmyer <agg...@gmail.com>; flexradio@flex-radio.biz
> Sent: Thu, May 13, 2010 6:03:23 PM
> Subject: Re: [Flexradio] Transmit delay
>
> This is due to HRD generating lots of CAT data (apparently) have a look at
> this, works a treat.
>
> http://vhfwiki.com/minideluxe
>
>
>
> -----Original Message-----
> From: flexradio-boun...@flex-radio.biz
> [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of adam grossmyer
> Sent: 13 May 2010 22:54
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] Transmit delay
>
> Ok I know I just read this in either the forums or on the reflector,  did
> some one mention about a delay when using DM780 and the flex?  I am having
> the same issue about 80% of the time when I go to transmit with DM780 the
> radio goes into xmit mode but there is a good 1-3 second delay before it
> actually xmits the data from DM780. I do not lose any of the data I am
> trying to send, it's like it there is a delay from the digital program to
> the time it actually hits the Flex.  I apologize if you guys just talked
> about this but I can't seem to find where I read about this at.
>
> Adam
> N8MOX
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage:
> http://www.flex-radio.com/
>
>
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/
>
>
>
>
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flex-radio.com/  Homepage: 
> http://www.flex-radio.com/
>

-- 
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER

Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.fogbugz.com
Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/



      
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Reply via email to