I have a SDR-1000.
The SDR-1000 PA does not cover 6M. The output on 6M is the same as a
unit without the PA.
73,
Bill
NJ1H
On 6/30/2010 12:09 PM, Alfred Green wrote:
y...@aol.com wrote:
Here is my question, Have a 1000 that Iam giving to one of the kids
in our club. He asked me about 6 meters,as he worked that band as a
tech. I looked thru the forms and the KB didn't see much about the
1000 and six meters. I never used the radio on 6 and do not remember.
I realize the rig has very low output on six , How did the 1000 hear
on six meters? Better off to use a transverter for 6?
I have the SDR1000-LP, so I can't speak to the low power out if you
have the PA installed. On my unit the output on 6m is ~300mw, which is
comparable to the lower bands.
On receive it performs reasonably well, although is not as sensitive
as my F3000. I have made some contacts barefoot when 6 is open, but
really could use a preamp. My 6M7JHV at 60ft helps! The spurs are not
too bad; they are actually lower than on 10m.
Certainly a useable rig, but get it in his hands before the E-season
is over.
GL & 73, Alf NU8I
Scottsdale AZ DM43an
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/