Thank you very much! Always enjoy helping people enjoy their radios!
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394






On Sun, Dec 19, 2010 at 2:29 PM, Brad A. Steffler <bst...@comcast.net>wrote:

> Thanks to all who have suggested other things to look at for as sources of
> noise besides the power line.
>
> I can eliminate the computer as a source of noise for one simple reason.
> _Neal Campbell built it_. I know that it has been tested with a 5000a and
> was quiet when he made it. When I assembled my station, I scraped an area
> clean under the thumbscrew holding the side on and ran a ground wire from
> the PC case at that point to the station ground bus. The ground bus runs
> about 6 feet., using a #6 wire, to a copper coated steel rod 8 feet in the
> ground and then to another identical rod 15 feet away and  from that point
> to the house ground. All are tied together with #6 copper wire. So I think
> the computer and grounding are not the problem.
>
> I had not thought a lot about the house, but I had tested everything in he
>  house I could think of, by turning them off and got no change in the
> interference. There are two power poles about 100 feet, at most, and my
> truck's AM radio almost melts down when I go under them.
>
> I have ordered two arrow hand held beam antennas which I will use with my
> Kenwood TH6-FA. The "B" band on the HT can tune, in AM mode, from about 3
> MHz to 1.3 GHz. Then I will go through the house, listening to the noise as
> well as check the light pole around my house, especially the (apparently)
> noisy ones.
>
> You guys have given me some great ideas for checking other things out as
> well. I will also check out the switching PS also, although I got it from
> Flex with the 5000a.
>
> _Neal Campbell is my secret weapon_. Always generous with his time - a real
> gentleman and an expert in this area of Flex SDRs. Anyone who is
> contemplating a new PC ought to get him to build it. Saves a lot of trouble
> and time.
>
> 73,
>
> Brad
> KE4XJ
> _______________________________________________
> FlexRadio Systems Mailing List
> FlexRadio@flex-radio.biz
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> Knowledge Base: http://kc.flexradio.com/  Homepage:
> http://www.flexradio.com/
>
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to